Recently, most parts of North America have welcomed the rise in temperature. We are about to enter the busy spring season. Are you ready for your tractor? After a cold winter, your tractor often needs a comprehensive inspection. Starting the tractor without inspection and maintenance may cause damage to your machine. In order to avoid delaying work due to equipment problems, I have specially prepared five key maintenance steps for your tractor to welcome the spring. Let’s take a look!
1. Clean & Check Appearance
If you happen to own a beautiful orange Kubota tractor, then after a winter of dust, its appearance may have a layer of dust attached to it. This dust not only affects the appearance, but also seriously affects the heat dissipation of the tractor. If you buy a dust cover, it’s better. In short, the first step of spring maintenance is to clean the appearance, especially the engine, radiator, and hydraulic pipes. By the way, check various fuel filters. If you need new replacement parts, you can buy Kubota parts online earlier. In addition, check whether there are cracks on the body. Rapid drop or rise in temperature may have adverse effects on the tractor.
2. Check & Change Oil
Oil is actually seasonal, and while it is very popular to use oil for all seasons, if you live in an area with extreme weather (or a large temperature difference between fall and winter and spring and summer), I would recommend using a lower viscosity oil in the winter and a higher viscosity oil in the spring and summer. Oil is the “blood” of a tractor engine, and it directly affects the engine’s operating efficiency and lifespan. In addition to making sure you are using the right type of oil, it is important to check the oil level and oil quality. Dirty or sticky oil will wear out the machine. For a good and affordable oil filter, go to FridayParts! They have a wide range of filters that can be adapted to a variety of brands and models.
3. Check the Battery & Electrical System
The best way to store batteries is to take them out in advance and store them in a dry environment, but even so, batteries tend to lose some of their performance in cold weather. You should check the battery for corrosion in the spring and make sure the battery terminals are clean and free of oxides. If the battery is not charging well or cannot hold a charge, it is inevitable to buy a new one. By the way, check the tractor’s electrical system, including lights, starter motor, generator, etc.
4. Check Hydraulic System & Fluid Level
The hydraulic system is one of the core components of the tractor and is also the main system responsible for the tractor’s power transmission. It is responsible for driving working devices such as buckets and plowshares. You should check the quality and level of the hydraulic oil, and add hydraulic oil when necessary to reach the standard amount that allows the tractor to operate. You can also check the hydraulic hose to see if there are any signs of leakage to ensure the system’s tightness and normal pressure.
5. Check Tires & Transmission System
Most tractors are tire-style, and crawler-style ones are relatively rare. Tires are made of rubber, which is very prone to aging and even cracking under the influence of low temperatures in winter. Before starting, pay attention to checking the wear of the tires to see if the tractor is still suitable for operation. If the tires are flat, you can inflate them appropriately. The gearbox, differential, etc., as part of the tractor’s transmission system, also require you to ensure smooth gear shifting and no abnormalities in the gears.
Conclusion
The above are the five main points that need to be checked when running a tractor in spring, namely cleaning the appearance, checking the oil, battery, hydraulic system, and tires and other key components. If you find any tractor that needs to be replaced or upgraded is missing, you can go to FridayParts to find the corresponding replacement parts and let FridayParts help you have a busy but smooth spring!
